Victron SmartSolar 100/30 + Cerbo GX MK2 Monitoring Kit — 30A MPPT, VE.Direct Cable & VRM Remote Monitoring (12V/24V)

Everything you need to put a SmartSolar 100/30 on the Victron VRM portal, in one box. This kit pairs the SmartSolar MPPT 100/30 charge controller with a Cerbo GX MK2 and the 0.9 m VE.Direct cable that connects them, so you can watch and control your solar charging from anywhere.

Save $27.85 compared with buying the three parts separately.

What's in the kit

What you get

• 30A of solar charging — up to about 440W of panels on a 12V bank or 880W on 24V, with 100V max PV input and Victron's fast MPPT tracking
• Remote monitoring on VRM — live solar yield, battery voltage and charge state from your phone or browser, with history and alarm notifications
• Room to grow — the Cerbo has spare VE.Direct, VE.Bus and VE.Can ports for adding a SmartShunt, inverter/charger, more chargers or a lithium BMS later
• Plug and play — the VE.Direct cable runs straight from the MPPT to the Cerbo; no adapters needed
• Local display option — add a GX Touch 50 or GX Touch 70 for a touchscreen at the install

Good fit for

• RV and van — a 200–400W roof array on a 12V house bank, monitored while you're away
• Off-grid cabin or shed — check the system remotely before you make the trip
• Remote sites and trailers — surveillance, telemetry and work trailers that need alerts when the battery runs low
• Starter Victron systems — begin with solar and monitoring, then add an inverter/charger and battery monitor on the same Cerbo

Need more?

The Cerbo needs a network connection (Wi-Fi or Ethernet) for VRM. A battery monitor such as the SmartShunt adds accurate state of charge; GX Touch display, panels, battery and fusing are sold separately. Not sure your array suits a 100/30? Call 346-574-9652 or email support@jonssontech.net with your panel specs and we'll check it before you buy.

Every Jonsson Tech order ships within 5 days nationwide from our Houston, Texas warehouse.