Skip to product information
1 of 1

Victron Energy

Victron SmartSolar MPPT RS 450/200-MC4 — 200A Dual-MPPT Solar Charge Controller, 450V PV (48V Only)

Victron SmartSolar MPPT RS 450/200-MC4 — 200A Dual-MPPT Solar Charge Controller, 450V PV (48V Only)

Regular price $1,938.85
Regular price Sale price $1,938.85
Sale Sold out

The Victron SmartSolar MPPT RS 450/200-MC4 is the flagship solar charge controller in the Victron lineup — a string-inverter-class MPPT designed for large residential and commercial off-grid installations. 200A of charge current, 450V max PV input, and two independent MPPT trackers, allowing you to run two separate panel strings with different orientations or wattages on a single controller. 48V battery only. MC4 PV connectors pre-installed.

This is not a small-system MPPT — it's a serious piece of off-grid infrastructure designed to pair with Victron MultiPlus-II or Quattro inverter/chargers for whole-home or whole-business off-grid systems.

Solar array sizing

Spec Per MPPT tracker Both trackers combined
Max PV input power ~5750W ~11,500W
Max PV open-circuit voltage 450V 450V (each)
Typical setup 10–12 residential 380W panels in series 20–24 panels total in 2 separate strings

Dual MPPT advantage: run two strings with different panel counts, orientations (east/west), or even different panel models on the same controller. Each MPPT tracks independently for maximum harvest.

Why the SmartSolar RS 450/200

  • Two independent MPPT trackers — mix-and-match strings without compromise
  • 450V max PV — long string-inverter-style configurations with 10–12 residential panels in series
  • 200A charge current at 48V — up to 11,500W of solar input
  • MC4 connectors pre-installed — plug-and-play with standard residential solar panel leads
  • Bluetooth + VictronConnect — phone monitoring out of the box
  • VE.Direct AND VE.Can — dual networking ports for system integration with MultiPlus-II / Quattro and Cerbo GX
  • 96% efficiency at full load — active fan-cooled
  • Built-in DC isolator switch — simplifies code-compliant install
  • Anti-islanding & ground fault detection — designed for code compliance in grid-tied hybrid systems
  • Wall mountable — large heatsink, designed for mechanical room or solar combiner space

Specifications

Nominal battery voltage 48V (only)
Rated charge current 200A
MPPT trackers 2 (independent)
Maximum PV open-circuit voltage (per tracker) 450V
Maximum PV input power (per tracker) 5750W
Maximum PV input power (total) 11,500W
Peak efficiency 96%
Bluetooth Built-in (VictronConnect app)
VE.Direct port Yes
VE.Can port Yes (for parallel and VE.Bus inverter integration)
PV connection style MC4 (pre-installed)
Cooling Active fan (intelligent)
Built-in DC isolator Yes
Ground fault detection Yes
Operating temperature -20°C to +60°C (full power up to 40°C)
Enclosure rating IP21
Mounting Wall mount
Manufacturer SKU SCC145120512
Warranty 5 years (manufacturer)

Recommended applications

  • Whole-home off-grid — 48V system pairing with 2× Quattro 48/5000 or larger for full home backup
  • Small commercial off-grid — retail location, off-grid warehouse, agricultural operation
  • Hybrid backup with grid-tie — home with both grid and battery, pairs with MultiPlus-II
  • Large rural homestead — 8–12kW solar array on a 48V battery bank
  • Commercial telecom shelters — large remote sites with significant solar capacity
  • Microgrid pilot installations — community energy projects

System design recommended

This is not a DIY install. The RS 450/200 is sized for systems with serious wiring, code compliance requirements, and integration with Victron inverter/chargers. We strongly recommend a pre-purchase system design consultation — send us your panel datasheet, intended layout, battery bank specs, and inverter setup to support@jonssontech.net or call 346-574-9652 and we'll design the array string layout and confirm component compatibility before you order.

Every Jonsson Tech order ships within 5 days nationwide from our Houston, Texas warehouse.

View full details