Victron Energy
Victron MultiPlus-II 12/4k/160-50 2x120V — Inverter/Charger
Victron MultiPlus-II 12/4k/160-50 2x120V — Inverter/Charger
Couldn't load pickup availability
The Victron MultiPlus-II 12/4k/160-50 2x120V is the one-box solution for standard North American 50A 120/240VAC split-phase shore power and generator connections. Unlike a single-leg 120V inverter/charger, it accepts and passes through both legs of a 120/240V split-phase supply directly — no autotransformer and no second paralleled unit needed to handle a 50A shore cord or split-phase generator. It delivers 3.4 kW continuous of pure sine wave power and 4.0 kW for an hour from a cold start, with a 160A battery charger — the largest in the 12V range.
Why choose the 2x120V over the plain 120V model
If your RV, boat or cabin's shore/generator connection is a 50A 120/240V split-phase feed (two hot legs), this is the model built for it. It ties into both L1 and L2, charging off whichever legs are live and passing both through to your panel. When running off-grid on battery power with no shore or generator source present, it internally connects L1 and L2 together so both outputs still get 120V from the single inverter — true 240V passthrough requires an actual split-phase source upstream (shore power or a generator), since one inverter can't synthesize 240V from a 12V bank on its own.
Key specs
3.4 kW continuous at 25°C (3.1 kW at 40°C), 4.0 kW for 1 hour and 4.5 kW for 30 minutes from a cold start, with a 6 kW peak for 2 seconds for motor starts. 160A charger with adaptive multi-stage charge profile and battery temperature sensing. PowerControl and PowerAssist on the L1 input: set a current limit and the unit tops up from the battery when demand exceeds it. 50A transfer switch, 50A per leg AC input and auxiliary output. Scales with an optional 100A external current sensor, parallel and three-phase configurations, and full ESS capability. Works with MPPT solar charge controllers and grid-tie inverters. Connect a Cerbo GX or Ekrano GX for free remote monitoring and control on VRM, with lithium battery communication through the GX device.
Specifications
Part number PMP122405200 · Battery voltage 12V (DC input range 9.5–17V) · Output 120VAC per leg ±2%, 60Hz ±0.1%, pure sine wave · Continuous power 3.4 kW at 25°C / 3.1 kW at 40°C / 2.4 kW at 65°C · Time-limited power (cold start) 4.0 kW for 1 h · 4.5 kW for 30 min · Peak power 6 kW for 2 s · Maximum efficiency 93% · Zero-load power 18 W (11 W AES mode, 4 W search mode) · Charger 160A max · absorption 14.4V · float 13.8V · storage 13.2V · AC input split phase 180–280VAC or single phase 90–140VAC, 55–65Hz · 50A transfer switch · 50A max input per leg · Auxiliary output 50A per leg · Programmable relay Yes (alarm, DC undervoltage or genset start/stop) · Communication VE.Bus, 2× general purpose ports, remote on/off · Battery connection 2×2 M8 bolts · AC connection screw terminals, 21 mm² (4 AWG) · Operating temperature -40 to +65°C (-40 to 149°F), fan assisted · Humidity up to 95%, non-condensing · Enclosure Steel, blue RAL 5012 · IP22 · Dimensions (H × W × D) 650 × 275 × 165 mm (25.6 × 11 × 6.5 in) · Weight 25 kg (55 lb) · Listing UL 458 · Safety EN-IEC 60335-1, EN-IEC 60335-2-29 · EMC EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, IEC 61000-6-1/2/3
Installation note
At 4 kW on a 12V bank, DC current can exceed 350A. Use short, heavy battery cables, a correctly rated Class-T or MEGA/ANL fuse, and a battery bank able to deliver that current. Configuration uses VictronConnect with a VE.Bus Smart dongle, or VEConfigure with an MK3-USB interface.
Sold by Jonsson Tech, an authorized Victron Energy dealer and installer in Spring, Texas. This is a genuine Victron product with the full manufacturer warranty, and US-based technical support from people who install these systems. Need help sizing cables, fusing or a complete system? Just ask.
Share
