2/0 AWG (70mm²) Pre-Made Battery Cable with Tinned Copper Lugs — Made in Italy

Ready-to-install 2/0 AWG battery cables built in our Texas shop from our own Made-in-Italy 70mm² copper cable. Each cable has a heavy-duty tinned copper lug crimped on both ends with a hydraulic crimper and sealed with adhesive-lined heat shrink. Pick your length, color and stud size, and it arrives ready to bolt on.

Specifications

• Conductor: 70mm² fine-stranded copper, about 4% more copper than standard 2/0 AWG (67.4mm²)
• Voltage rating: 600V
• Lugs: tinned copper, crimped both ends, 5/16" (M8) or 3/8" (M10) stud
• Ends sealed with adhesive-lined heat shrink
• Colors: Red (positive) or Black (negative)
• Length is measured from lug center to lug center
• Cable jacket marked "JonssonTech LLC 2/0 AWG 600V Battery Cable Made in Italy"

Which stud size do I need?

Check the terminal on your battery, inverter or busbar. M8 terminals take the 5/16" lug and M10 terminals take the 3/8" lug. Need a different stud size on each end? Contact us and we'll build it.

Great for

• Battery-to-inverter and battery-to-busbar connections
• Victron MultiPlus, Quattro, Lynx and SmartShunt installs
• Parallel battery interconnects (order equal lengths so each battery shares current evenly)
• RV, van, marine and off-grid 12V, 24V and 48V DC systems

Prefer lighter cable for shorter or lower-current runs? See our 1/0 AWG (50mm²) pre-made battery cables. Need a custom length? Contact Jonsson Tech.