Victron VE.Direct Cable 0.9m (2.95 ft) — RJ12 to RJ12 for SmartShunt, MPPT, BMV

The Victron VE.Direct Cable 0.9m is the required cable to connect any VE.Direct device to a Cerbo GX — plug one end into a SmartShunt, BMV-712, SmartSolar MPPT, or Phoenix Inverter, plug the other end into the Cerbo GX, and your devices now appear in the Cerbo's system view and on the VRM Portal.

What it connects

• SmartShunt — battery monitor data feeds into the Cerbo GX
• BMV-712 / BMV-700 — battery monitor display data shares with the Cerbo
• SmartSolar MPPT (any size) — solar production data feeds into VRM
• Phoenix Inverter — inverter status feeds into the Cerbo
• Orion-Tr Smart DC-DC Charger — charging data feeds into VRM
• VE.Direct Bluetooth Smart Dongle — add Bluetooth to a non-Smart Victron device

Which length do I need?

The 0.9m (2.95 ft) length is the right pick when your Cerbo GX is mounted near your VE.Direct device — typical for SmartShunt mounted close to a battery bank with the Cerbo GX on the same panel.

For longer runs, Victron also offers 1.8m, 3m, 5m, and 10m lengths. The cable can run up to 10m without signal issues. If you need longer than 10m, use a VE.Direct over Ethernet adapter.

Specifications

Recommended use

• Cerbo GX system integration — connect SmartShunt, MPPT, BMV to the system brain
• Phone monitoring (with Bluetooth dongle) — add Bluetooth to non-Smart devices
• Spare cable — keep one on hand for system expansion or replacement

Every Jonsson Tech order ships within 5 days nationwide from our Houston, Texas warehouse.