{"product_id":"victron-multiplus-ii-12-4k-160-50-120v-inverter-charger","title":"Victron MultiPlus-II 12\/4k\/160-50 120V Inverter\/Charger — 3.4kW, 160A Charger (12V High-Output, UL 458)","description":"\u003cp\u003eThe Victron MultiPlus-II 12\/4k\/160-50 120V is the most powerful 12V MultiPlus-II. It delivers \u003cstrong\u003e3.4 kW continuous\u003c\/strong\u003e of pure sine wave power and \u003cstrong\u003e4.0 kW for an hour\u003c\/strong\u003e from a cold start, and its \u003cstrong\u003e160A battery charger\u003c\/strong\u003e is the largest in the 12V range. It's the step up from the 12\/3000 for RVs, vans, boats and off-grid cabins that want to stay at 12V but run bigger loads like air conditioners, induction cooktops and microwaves, and recharge a large lithium bank quickly.\u003c\/p\u003e\n\u003cp\u003eIt combines an inverter, a multi-stage charger and a 50A automatic transfer switch in one unit. If shore or generator power drops, it takes over the load in under 20 milliseconds, so computers and electronics keep running without interruption.\u003c\/p\u003e\n\u003ch3\u003eWhy choose the 12\/4k\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.4 kW continuous at 25°C\u003c\/strong\u003e (3.1 kW at 40°C), \u003cstrong\u003e4.0 kW for 1 hour\u003c\/strong\u003e and \u003cstrong\u003e4.5 kW for 30 minutes\u003c\/strong\u003e from a cold start, with a 6 kW peak for 2 seconds for motor starts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e160A charger\u003c\/strong\u003e, 33% more than the 12\/3000's 120A, with an adaptive multi-stage charge profile and battery temperature sensing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePowerControl and PowerAssist\u003c\/strong\u003e: set a shore or generator current limit and the MultiPlus-II tops up from the battery when demand exceeds it. A 30A RV pedestal or a small generator can then run loads it couldn't handle alone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo AC outputs\u003c\/strong\u003e: a no-break main output, plus a 32A auxiliary output that's only live when AC input is present. Use it for a water heater or other loads that shouldn't drain the battery.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScales up\u003c\/strong\u003e: two units for a 120\/240V split-phase output, up to 6 in parallel, or three-phase.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eESS capable\u003c\/strong\u003e, and works with MPPT solar charge controllers and grid-tie inverters. An optional 100A external current sensor extends PowerControl and PowerAssist.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull system integration\u003c\/strong\u003e: connect a Cerbo GX or Ekrano GX for free remote monitoring and control on VRM. Lithium battery communication runs through the GX device.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003ePMP122405100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery voltage\u003c\/td\u003e\n\u003ctd\u003e12V (DC input range 9.5–17V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput\u003c\/td\u003e\n\u003ctd\u003e120VAC ±2%, 60Hz ±0.1%, pure sine wave\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous power\u003c\/td\u003e\n\u003ctd\u003e3.4 kW at 25°C \/ 3.1 kW at 40°C \/ 2.4 kW at 65°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTime-limited power (cold start)\u003c\/td\u003e\n\u003ctd\u003e4.0 kW for 1 h · 4.5 kW for 30 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePeak power\u003c\/td\u003e\n\u003ctd\u003e6 kW for 2 s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum efficiency\u003c\/td\u003e\n\u003ctd\u003e93%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eZero-load power\u003c\/td\u003e\n\u003ctd\u003e18 W (11 W AES mode, 4 W search mode)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCharger\u003c\/td\u003e\n\u003ctd\u003e160A max · absorption 14.4V · float 13.8V · storage 13.2V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAC input\u003c\/td\u003e\n\u003ctd\u003e90–140VAC, 55–65Hz · 50A transfer switch · 50A max input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAuxiliary output\u003c\/td\u003e\n\u003ctd\u003e32A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProgrammable relay\u003c\/td\u003e\n\u003ctd\u003eYes (alarm, DC undervoltage or genset start\/stop)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommunication\u003c\/td\u003e\n\u003ctd\u003eVE.Bus, 2× general purpose ports, remote on\/off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery connection\u003c\/td\u003e\n\u003ctd\u003e2×2 M8 bolts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e120VAC connection\u003c\/td\u003e\n\u003ctd\u003e13 mm² (6 AWG)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\u003ctd\u003e-40 to +60°C (-40 to 140°F), fan assisted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eSteel, blue RAL 5012 · IP22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (H × W × D)\u003c\/td\u003e\n\u003ctd\u003e631 × 277 × 164 mm (24.8 × 10.9 × 6.5 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e22 kg (49 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eListing\u003c\/td\u003e\n\u003ctd\u003eUL 458\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSafety\u003c\/td\u003e\n\u003ctd\u003eEN-IEC 60335-1, EN-IEC 60335-2-29, CSA 22.2 107.1-16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eInstallation note\u003c\/h3\u003e\n\u003cp\u003eAt 4 kW on a 12V bank, DC current can exceed 350A. Use short, heavy battery cables, a correctly rated Class-T or MEGA\/ANL fuse, and a battery bank able to deliver that current. Configuration uses VictronConnect with a VE.Bus Smart dongle, or VEConfigure with an MK3-USB interface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSold by Jonsson Tech\u003c\/strong\u003e, an authorized Victron Energy dealer and installer in Spring, Texas. This is a genuine Victron product with the full manufacturer warranty, and US-based technical support from people who install these systems. Need help sizing cables, fusing or a complete system? Just ask.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":50560594772187,"sku":"PMP122405100","price":1105.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/3200\/9947\/files\/Multiplus-II_12V4K-160A_120V_Front_9f0f2bbf-7a74-4e04-a3ca-1e3156256184.jpg?v=1791553442","url":"https:\/\/www.jonssontech.net\/products\/victron-multiplus-ii-12-4k-160-50-120v-inverter-charger","provider":"Jonsson Tech LLC","version":"1.0","type":"link"}